SPRUT KIT configurator

$1,200.00
In stock
KIT:
+
Shipping
Payment
Why Scalca

12 month warrantyGuarantee for all purchased goods in our online store is 12 months

24/7 support

30 days moneybackReturn and exchange - no problem.">Return and exchange - no problem

Different payment methods

Find US:

Scalca SPRUT – multipurpose modular magnetic car grip for DJI RONIN / MOVI and other stabilizers. Due to modular construction, you can install car grip on the any type of spun surface.

POWERFUL PULLING FORCE

Powerful SCALCA SPRUT magnets allow you to install your grip fast and easy. Magnets power is 1000lbs (SPRUT 8kit) and 500lbs (SPRUT 4kit). It is very strong gripping, which necessary for working with expensive moviemaking equipment. SCALCA SPRUT mounting system consist of eight plates (for SPRUT 8 kit) or four plates (for SPRUT 4 kit). These plates are making of strong aircraft aluminum. Each plate includes group in six magnets with diameter 25 mm. Position of each magnet in plate is apporting the pad force and keeping SCALCA SPRUT during installation on metal car surface proportionally. It is important to noticed that high rate of equipment setup is derived from Magnet gripping system. Thanks to the same high gripping power, it has become possible to install SCALCA SPRUT on the dusty and dirty car surface. Long service life of magnets spares you from necessity to care about its changing and SCALCA SPRUT servicing.

TAKES ANY FORM

Our SCALCA SPRUT has Modular System, which allows gripping SPRUT on the any metal curved surfaces. What is SCALCA SPRUT Modular System? It is system of connected universal arms, which can be held one by one according to your wishes. It becomes possible by applying connection joint, which are presented by SCALCA “female connectors”. Standard set SCALCA SPRUT 8 kit includes 150mm long arms and 110mm shot arms. It is enough for different variations. Of course, if you have a lot of wishes and this set too small for realization, you always can buy supplements for your standard kit. You increase the gripping power with supplements and SCALCA SPRUT become saver for shooting. Your choice depends on what power you need and what configuration you want to use.

TAKING CARE ABOUT YOUR CAR

Our SCALCA SPRUT has Protective Silicone Pads, which are oriented to save your car from scratching, chipping and other car surface damages. Specially designed Protective Silicone Pads don't reduce the SCALCA SPRUT gripping power with car surface thanks to its optimized bottom thickness. These Protective pads are produced on our own production with quality silicon.

COMPACT SIZE

One more advantage of our SCALCA SPRUT is its ease of transportation. Thanks to the same SCALCA SPRUT Modular System, our product is placed in small case. It greatly makes easer transportation and storage. We know how it is important the small size for moveimakers because they deal with a large number of not so compact equipment. SCALCA SPRUT doesn’t take much space. Convenient case simplifies the transportation and makes the possibility to take SCALCA SPRUT as hand-luggage to aircraft.

SAVE TIME ON INSTALLATION

Thanks to the Modular System and the Magnet system SCALCA SPRUT is very simple at installation. Installation on the car takes not more than 5 minutes. We know how it is important the installation of moviemaking tools, especially in limited time conditions. For example, it may be shot daylight hours conditions. When the time is limited everyone wants to spend it efficiently at most. In our case, the main target is quality shooting material. SCALCA SPRUT allows cutting down installation time in favor of shooting process time. You will set up your SPRUT easy and fast as you wish.

VIBRATION ISOLATION SYSTEM

Unique Vibration Isolation System is presented by rope damper, which is capable of leveling down outcome of moving on the uneven road. Damper system is created for car moving on the uneven road. It is used ropes with thickness 6 mm. it is optimal value, which was calculated and checked by a lot of tests.

UNIVERSAL TOOL

Flexibility of our SCALCA SPRUT involves the possibility of using it with different electronic stabilizers such as DJI RONIN, MOVI and other. We have created special adapters for all devices. Also, SCALCA SPRUT can be installed on any vehicle. There are only two limiting conditions for using SCALCA SPRUT: moviemaking vehicle speed, which must not exceed 200 km/h, and max weight of moviemaking equipment (not more than 35 kg). Nevertheless, these two special conditions are in normal range of moviemaking conditions.

How to choose your Scalca Sprut KIT?

1st Step: Choose number of magnets 4 , 8 or 12 pcs

4 KIT

Compatible: small gimbals and cameras.

Gimbals: DJI RONIN-M, FreeFly MoVI M5.

Cameras: Small cameras and lightweight DSLR

Max payload: 7 KG (16 lb)

8 KIT

Compatible: Medium size gimbals and cameras.

Gimbals: DJI RONIN-M,RONIN,RONIN-MX, FreeFly MoVI M5,M10,M15, PRO

Cameras: DSLR, RED, ARRI ,Alexa Mini

Max payload: 25 KG (55 lb)

12 KIT

Compatible: Large gimbals and cameras.

Gimbals: DJI RONIN-M,RONIN,RONIN-MX, FreeFly MoVI M5,M10,M15, PRO, XL

Cameras: DSLR, RED, ARRI

Max payload: 45 KG (100lb)


2nd Step: Choose type of central plate

Anti-vibration central plate for DJI Ronin/Freefly MoVI

Compatible: Any type of brushless gimbals (Ronin, MoVI, Gremsy and etc)

If you are going to use Scalca Sprut with electronic stabilizers such as Movi and Ronin only, we recommend to choose this case

SCALCA LEVELER

Compatible: All type of camera and fast installation plates (ARRI,RED,Manfrotto, WoodenCamera and etc.)

If you want to installate camera on the car without gimbal with quick-release plates Woodencamera, Manfrotto, ARRI and other, we recommend you choose this case

Anti-vibration central plate + SCALCA LEVELER

Compatible: All type gimbals and cameras

This case includes both previous variants and will allow you to handle a problem for fast camera installation on your car


3rd Step: Choose your accessories

Side mount adapter

This adapter will allow you to grip camera on the trunk or on the door sideways

FreeFly MoVI adapter

Quick mount adapter for FreeFly MoVI M5, M10, M15, PRO

Spare silicone pads

We recommend to have some reserve silicon pads always when you are shooting

1/4"-3/8" magnetic mount module

This magnet module allows you to grip small size devices(Magic arm for example) with screw 1/4" или 3/8" on your car

    4 KIT:


  • Central plates
  • 4x Wire damper modules
  • 4x Long arms
  • 4x Magnet modules
  • Screws
  • Ronin adapter plate
  • 4x L-connectors
  • Transportation case

    8 KIT:


  • Central plates
  • 4x Wire damper modules
  • 4x Long arms
  • 4x Short arms
  • 8x Magnet modules
  • Screws
  • Ronin adapter plate
  • 4x L-connectors
  • Transportation case

    12 KIT:


  • Central plates
  • 4x Wire damper modules
  • 8x Long arms
  • 4x Short arms
  • 12x Magnet modules
  • Screws
  • Ronin adapter plate
  • 4x L-connectors
  • Transportation case